Product Information

Naevy and Raed Switch by AEBoard.

About Naevy Switch
The Naevy switch project has been a year of continual research and development into tactile switches. The current tactile switch market has been stagnant, without any innovation and most tactile builds require acquisition of multiple switches to be put together - increasing over cost, waste and effort.
The aim of the Naevy switch is to create a new type of tactile - affordable and good as a stock switch. We are still in early days of where we want to be for the ultimate tactile but we believe that have something available to the market that you’ll love - a smooth, great new tactile feeling.
The stem is an original mold owned by AEBoards and it uses a panda derivative housing (most commonly used for tactile switch modding). All funding was paid for by AEBoards without any GB money involved - we believe in our product and shouldered the risk for this project.

Specifications for Tactile Stem:
Tactile Stem: MX Clear-like bump with extended pole

Bottoms out a little bit earlier and moves the bump to mid/mid-top
These stems have a different bump to halo stems and don’t feel like Holy Pandas
This stem mold is owned by AEBoards

Material

Nylon Bottom, PC Top
Stem: MPE Tactile Stem - Custom Mixed PE - A proprietary MPE blend that enables smoothness and good shrinking rates
58g spring
3 pin

Color: Pearlescent White

Specifications for Housing:
Panda derivative
Pandas have become synonymous with “tactile”, and for the most part, most tactile builds will have this style of housing. We’re currently in the process of remaking a 5 pin mold to support PCB mounted builds.
Material: R1.5: Nylon Bottom Polycrab Top

About Raed Switch
The Raed switch by AEBoards is a linear version of Naevy.
Specifications For the Stem:

Smooth stem with an extended pole.

Bottoms out a little bit earlier.
Adds tolerances for keycaps with north-facing switches.
This stem mold is owned by AEBoards

Material: Custom Mixed PE (MPE):

UHMWPE stems are one of the smoothest plastics around due to its very low coefficient of friction, however this material suffers from shrinkage rates. Our solution was to create a MPE that enables us to get smoothness and good shrinking rates.

Colour: Pearlescent White

Specifications For Housing:

Panda derivative

We’re using a Panda derivative with 3 pins for our first run. We’re currently in the process of remaking a 5 pin mold to support PCB mounted builds. Material: R1.5: Nylon Bottom, Polycarb Top Colour: R1.5: Burgundy-Red

These switches are sold in :

packs of 35, factory pre-packed with labelings.
iLumkb repacks of 10, in a zip bag.
iLumkb repacks of the sample pack, 2 x Raed and 2 x Naevy.