There was an error signing up for restock notifications. Please try again.
GB Starts: April 2nd, 2021 GB Ends: April 30th, 2021 Est. shipping date: Q4 2021
Designed to use a burger mount system, sandwiching the plate between washers and gaskets on either side, then using screws to hold the plate to the top of the case — delicious. The side of the case has a slight taper, which blends its faces front to back. Titan65's IBM-adjacent design summons a bold retrofuturistic look, one that's equally appealing in sci-fi hangars and modern desktops.
The board has a 7 degree typing angle with a USB-C port that is parallel to the ground. Its PCB is QMK and VIA compatible. There are through-hole solder and hotswap versions available.Please note, only the hotswap version has RGB.
With Aluminum Base:1.35kg With Brass Base:2.35kg
Burger Mounted Plate
Seamless Assembly with bottom panel
7 degree typing angle
VIA-compatible PCB with Unified C3 Daughterboard (USB-C)
Per-Key RGB (Hotswap Only)
ISO Layout (Soldered Only)
4mm Aluminum Plate
The Titan65 Kit comes with:
1x E-Coat 6061 aluminum board top
1x E-coat 6061 aluminum baseORBead-Blasted Brass with Passivation
1x Grey Anodized 4mm 6061 Aluminum Plate
QMK + VIA Compatible PCB
Unified C3 Daughterboard
Assortment of black silicone pads for feet and gaskets
M3 and M2 Allen Keys
Hotswap PCB Layout:
Soldered PCB Layout:
GB and Refund Policy: If you purchased this product, you are agreeing to the GB and Refund Policy. For more information, check our FAQ.